| Hoeveelheid: | |
|---|---|
Die Plastic Pipe Extrusion Mould/Die Head is 'n sleutelkomponent in die vervaardiging van plastiekpype. Dit is ontwerp met gevorderde tegnologie en verseker 'n konsekwente en gladde ekstrusieproses, wat lei tot hoë kwaliteit pype ekstrusie met uitstekende dimensionele akkuraatheid. Beskikbaar in verskillende groottes en konfigurasies, dit is geskik vir 'n wye verskeidenheid materiale, insluitend ABS, PS, PVC, HDPE en PPR.
Kernkenmerke:
Presisieontwerp : Verseker eenvormige vloeiverspreiding, wat lei tot produkte van hoër gehalte.
Duursame materiale en oppervlakbehandeling : Gemaak van staallegerings van hoë gehalte vir uitstekende slytasieweerstand. Hard-verchroomde platering verleng die lewensduur van ekstrusievorm.
Aanpasbaar : Beskikbaar in verskillende groottes om aan die spesifieke vereistes van verskeie ekstrusielyne te voldoen.
Doeltreffende verkoeling : Geoptimaliseerde verkoelingstelsel spesiaal vir groot PE pypgroottes om vinniger produksiesiklusse en verbeterde doeltreffendheid te verseker.
Maklike instandhouding : Eenvoudige ontwerp maak voorsiening vir vinnige demontage en maklike instandhouding.
Tegniese spesifikasie:
Materiaal: hoofmateriaal gebruik uitstekende staal as grondstof, koper of vlekvrye staal om huls te kalibreer om geskik te wees vir verskillende pypproduksie.
Geskik vir: PVC, HDPE, PPR, ABS en ander plastiekmateriale.
Groottereeks: Aanpasbaar, byvoorbeeld vir PVC-pyp standaardgrootte van 16mm tot 1200mm. vir PE pyp standaard grootte van 16mm tot 2000mm.
Druk: verskillende druk op versoek.
Pyp Verkoeling Tipe: Water of Lug Verkoeling.
Produk Aansoek:
Hierdie matryskop word wyd gebruik in die vervaardiging van verskillende soorte plastiekpype, insluitend watertoevoerpype, dreineringspype en industriële pype. Dit is ideaal vir beide kleinskaalse en grootskaalse ekstrusieprosesse.
Voordele en waarde:
Hoë produktiwiteit : Die matryskop is ontwerp om deurset te verhoog en produksiestilstand te verminder.
Verbeterde produkkwaliteit : Lewer uitstekende pypdimensionele stabiliteit, wat voldoening aan internasionale standaarde verseker.
Koste-doeltreffendheid : Met langdurige komponente en lae instandhoudingsbehoeftes, help die matryskop om algehele bedryfskoste te verminder.
Globale ondersteuning : Gerugsteun deur Demasuntech se kundige tegniese ondersteuning en kliëntediens.
Na-verkope diens:
Tegniese bystand: Ons bied omvattende tegniese ondersteuning regdeur die produklewensiklus.
Waarborg: Ons produkte kom met 'n waarborgperiode van 12 maande.
Opleiding: Ons verskaf opleiding vir jou span oor installasie, bedryf en instandhouding.
Global Reach: Met dienssentrums op sleutelliggings wêreldwyd, is ons in staat om kliënte doeltreffend by te staan, ongeag waar hulle geleë is.
PVC水用管 PVC waterdienspyp |
|||||||
公称压力等级和管材规格尺寸 SDR en die pypspesifikasies |
|||||||
Ø/mm |
管材SDR系列和公称压力(SDR en PN) |
||||||
S16 |
S12.5 |
S10 |
S8 |
S6.3 |
S5 |
S4 |
|
SDR33 |
SDR26 |
SDR21 |
SDR17 |
SDR13.6 |
SDR11 |
SDR9 |
|
PN0,63 |
PN0.8 |
PN1.0 |
PN1,25 |
PN1.6 |
PN2.0 |
PN2.5 |
|
公称壁厚 e n (Norminale pypwanddikte) |
|||||||
Ø20 |
--- |
--- |
--- |
--- |
--- |
2.0 |
2.3 |
Ø25 |
--- |
--- |
--- |
--- |
2.0 |
2.3 |
2.8 |
Ø32 |
--- |
--- |
--- |
2.0 |
2.4 |
2.9 |
3.6 |
Ø40 |
--- |
--- |
2.0 |
2.4 |
3.0 |
3.7 |
4.5 |
Ø50 |
--- |
2.0 |
2.4 |
3.0 |
3.7 |
4.6 |
5.6 |
Ø63 |
2.0 |
2.5 |
3.0 |
3.8 |
4.7 |
5.8 |
7.1 |
Ø75 |
2.3 |
2.9 |
3.6 |
4.5 |
5.6 |
6.9 |
8.4 |
Ø90 |
2.8 |
3.5 |
4.3 |
5.4 |
6.7 |
8.2 |
10.1 |
注: 公称壁厚（e n ）根据设计应力（σ s）10Mpa 确定，最小壁厚不小于2.0mm |
|||||||
Nominale wanddikte gebaseer op ontwerpspanning （σ s）10Mpa, en die minimale wanddikte moet nie minder nie as 2.0mm wees |
|||||||
Ø/mm |
管材SDR系列和公称压力(SDR en PN) |
||||||
S20 |
S16 |
S12.5 |
S10 |
S8 |
S6.3 |
S5 |
|
SDR41 |
SDR33 |
SDR26 |
SDR21 |
SDR17 |
SDR13.6 |
SDR11 |
|
PN0,63 |
PN0.8 |
PN1.0 |
PN1,25 |
PN1.6 |
PN2.0 |
PN2.5 |
|
公称壁厚 e n (Norminale pypwanddikte) |
|||||||
Ø110 |
2.7 |
3.4 |
4.2 |
5.3 |
6.6 |
8.1 |
10 |
Ø125 |
3.1 |
3.9 |
4.8 |
6 |
7.4 |
9.2 |
11.4 |
Ø140 |
3.5 |
4.3 |
5.4 |
6.7 |
8.3 |
10.3 |
12.7 |
Ø160 |
4 |
4.9 |
6.2 |
7.7 |
9.5 |
11.8 |
14.6 |
Ø180 |
4.4 |
5.5 |
6.9 |
8.6 |
10.7 |
13.3 |
16.4 |
Ø200 |
4.9 |
6.2 |
7.7 |
9.6 |
11.9 |
14.7 |
18.2 |
Ø225 |
5.5 |
6.9 |
8.6 |
10.8 |
13.4 |
16.6 |
--- |
Ø250 |
6.2 |
7.7 |
9.6 |
11.9 |
14.8 |
18.4 |
--- |
Ø280 |
6.9 |
8.6 |
10.7 |
13.4 |
16.6 |
20.6 |
--- |
Ø315 |
7.7 |
9.7 |
12.1 |
15 |
18.7 |
23.2 |
--- |
Ø355 |
8.7 |
10.9 |
13.6 |
16.9 |
21.1 |
26.1 |
--- |
Ø400 |
9.8 |
12.3 |
15.3 |
19.1 |
23.7 |
29.4 |
--- |
Ø450 |
11 |
13.8 |
17.2 |
21.5 |
26.7 |
33.1 |
--- |
Ø500 |
12.3 |
15.2 |
19.1 |
23.9 |
29.7 |
36.8 |
--- |
Ø560 |
13.7 |
17.2 |
21.4 |
26.7 |
--- |
--- |
--- |
Ø630 |
15.4 |
19.3 |
24.1 |
30 |
--- |
--- |
--- |
Ø710 |
17.4 |
21.8 |
27.2 |
--- |
--- |
--- |
--- |
Ø800 |
19.6 |
24.5 |
30.6 |
--- |
--- |
--- |
--- |
Ø900 |
22 |
27.5 |
--- |
--- |
--- |
--- |
--- |
Ø1000 |
24.5 |
30.6 |
--- |
--- |
--- |
--- |
--- |
Ø1200 |
29.3 |
36.4 |
--- |
--- |
--- |
--- |
--- |
注：公称壁厚（e n ）根据设计应力（σ s）12.5Mpa确定 |
|||||||
Nominale wanddikte gebaseer op ontwerpspanning （σ s）12.5Mpa |
|||||||
高密度聚乙烯（ PE-HD 100 ）管材规格 Pypspesifikasie vir HDPE-materiaal |
||||||||||||||
国标GB/T13663-2000使用规格及压力等级为黑色粗体字部分。 |
||||||||||||||
Swart dik tipe het die spesifikasie en PN getoon wat vir GB/T13663-2000 gebruik is |
||||||||||||||
Ø/mm |
SDR41 |
SDR33 |
SDR27.6 |
SDR26 |
SDR22 |
SDR21 |
SDR17,6 |
SDR17 |
SDR13.6 |
SDR11 |
SDR9 |
SDR7.4 |
||
0,4 Mpa |
0,5 Mpa |
0.6Mpa |
0.63Mpa |
0.77Mpa |
0,8 Mpa |
0,96 Mpa |
1.0Mpa |
1,25 Mpa |
1.6 Mpa |
2.0 Mpa |
2.5Mpa |
|||
Ø20 |
--- |
--- |
--- |
--- |
--- |
--- |
--- |
--- |
--- |
2 |
2.3 |
3 |
||
Ø25 |
--- |
--- |
--- |
--- |
--- |
--- |
--- |
--- |
2 |
2.3 |
3 |
3.5 |
||
Ø32 |
--- |
--- |
--- |
--- |
--- |
--- |
2 |
2 |
2.4 |
3 |
3.6 |
4.4 |
||
Ø40 |
--- |
--- |
--- |
--- |
2 |
2 |
2.3 |
2.4 |
3 |
3.7 |
4.5 |
5.5 |
||
Ø50 |
--- |
--- |
2 |
2 |
2.4 |
2.4 |
2.9 |
3 |
3.7 |
4.6 |
5.6 |
6.9 |
||
Ø63 |
--- |
--- |
2.3 |
2.5 |
2.9 |
3 |
3.6 |
3.8 |
4.7 |
5.8 |
7.1 |
8.6 |
||
Ø75 |
--- |
--- |
2.7 |
2.9 |
3.4 |
3.6 |
4.3 |
4.5 |
5.6 |
6.8 |
8.4 |
10.3 |
||
Ø90 |
2.2 |
2.8 |
3.3 |
3.5 |
4.1 |
4.3 |
5.1 |
5.4 |
6.7 |
8.2 |
10.1 |
12.3 |
||
Ø110 |
2.7 |
3.4 |
4 |
4.2 |
5 |
5.3 |
6.3 |
6.6 |
8.1 |
10 |
12.3 |
15.1 |
||
Ø125 |
3.1 |
3.9 |
4.5 |
4.8 |
5.7 |
6 |
7.1 |
7.4 |
9.2 |
11.4 |
14 |
17.1 |
||
Ø140 |
3.5 |
4.3 |
5.1 |
5.4 |
6.4 |
6.7 |
8 |
8.3 |
10.3 |
12.7 |
15.7 |
19.2 |
||
Ø160 |
4 |
4.9 |
5.8 |
6.2 |
7.3 |
7.7 |
9.1 |
9.5 |
11.8 |
14.6 |
17.9 |
21.9 |
||
Ø180 |
4.4 |
5.5 |
6.5 |
6.9 |
8.2 |
8.6 |
10.2 |
10.7 |
13.3 |
16.4 |
20.1 |
24.6 |
||
Ø200 |
4.9 |
6.2 |
7.2 |
7.7 |
9.1 |
9.6 |
11.4 |
11.9 |
14.7 |
18.2 |
22.4 |
27.4 |
||
Ø225 |
5.5 |
6.9 |
8.1 |
8.6 |
10.2 |
10.8 |
12.8 |
13.4 |
16.6 |
20.5 |
25.2 |
30.8 |
||
Ø250 |
6.2 |
7.7 |
9 |
9.6 |
11.4 |
11.9 |
14.2 |
14.8 |
18.4 |
22.7 |
27.9 |
34.2 |
||
Ø280 |
6.9 |
8.6 |
10.1 |
10.7 |
12.7 |
13.4 |
15.9 |
16.6 |
20.6 |
25.4 |
31.3 |
38.3 |
||
Ø315 |
7.7 |
9.7 |
11.4 |
12.1 |
14.3 |
15 |
17.9 |
18.7 |
23.2 |
28.6 |
35.2 |
43.1 |
||
Ø355 |
9.6 |
12.1 |
14 |
14.8 |
17.4 |
18.2 |
20.1 |
21.1 |
26.1 |
32.2 |
39.7 |
48.5 |
||
Ø400 |
9.8 |
12.3 |
14.5 |
15.3 |
18.2 |
19.1 |
22.7 |
23.7 |
29.4 |
36.3 |
44.7 |
54.7 |
||
Ø450 |
11 |
13.8 |
16.3 |
17.2 |
20.5 |
21.5 |
25.5 |
26.7 |
33.1 |
40.9 |
50.3 |
61.5 |
||
Ø500 |
12.3 |
15.3 |
18.1 |
19.1 |
22.7 |
23.9 |
28.3 |
29.7 |
36.8 |
45.4 |
55.8 |
--- |
||
Ø560 |
13.7 |
17.2 |
20.2 |
21.4 |
25.5 |
26.7 |
31.7 |
33.2 |
41.2 |
50.8 |
62.2 |
--- |
||
Ø630 |
15.4 |
19.3 |
22.8 |
24.1 |
28.6 |
30 |
35.7 |
37.4 |
46.3 |
57.2 |
71 |
--- |
||
Ø710 |
17.4 |
21.8 |
25.7 |
27.2 |
32.3 |
33.9 |
40.2 |
42.1 |
52.2 |
64.5 |
80,0* |
--- |
||
Ø800 |
19.6 |
24.5 |
28.9 |
30.6 |
36.4 |
38.1 |
45.3 |
47.4 |
58.8 |
72.7 |
90,1* |
--- |
||
Ø900 |
22 |
27.6 |
32.5 |
34.4 |
40.9 |
42.9 |
51 |
53.3 |
66.2 |
81,8* |
--- |
--- |
||
Ø1000 |
24.5 |
30.6 |
36.1 |
38.2 |
45.5 |
47.7 |
56.6 |
59.3 |
72,5* |
--- |
--- |
--- |
||
Ø1100 |
26.8 |
34.1 |
39.8 |
42.3 |
50 |
52.4 |
62.3 |
65.2 |
80,9* |
--- |
--- |
--- |
||
Ø1200 |
29.4 |
36.7 |
43.4 |
45.9 |
54.5 |
57.2 |
67.9 |
70.6 |
88,2* |
--- |
--- |
--- |
||
Ø1400 |
34.3 |
42.9 |
50.6 |
53.5 |
63.6 |
66.7 |
79.2 |
82.4 |
102.9 |
--- |
--- |
--- |
||
Ø1600 |
39.2 |
49 |
57.8 |
61.2 |
72.7 |
76.2 |
90.6 |
94.1 |
117,6* |
--- |
--- |
--- |
||
Ø1800 |
43.9 |
54.5 |
65.1 |
69.1 |
81.8 |
85.7 |
101.9 |
105,9* |
--- |
--- |
--- |
--- |
||
Ø2000 |
48.8 |
60.6 |
72.3 |
76.9 |
90.9 |
95.2 |
113.2 |
117,6* |
--- |
--- |
--- |
--- |
||
管材壁厚（e n ）=公称外径/SDR |
||||||||||||||
Pypwanddikte（e n ）=Norminale buitenste deursnee (d n ) /SDR |
||||||||||||||
